Electric Heating: Increasing Photovoltaic Self-Consumption

How It Works

Anyone installing a photovoltaic system soon encounters a rarely discussed problem: the energy you produce is almost never the energy you consume at that exact moment. The sun produces energy during the day, often when no one is home, while consumption is concentrated in the early morning and evening. The result is that, without a system capable of managing this mismatch, a large portion of the energy produced is fed into the grid and 'sold' at a much lower value than it would cost to purchase it back from the grid.

In this article, we examine why electric heating is one of the most effective tools for solving this problem, and how intelligent management can bring photovoltaic self-consumption close to 100%.

The challenge of photovoltaic self-consumption

electric heating increasing self-consumption energy fed into grid
Why production and consumption do not align

A photovoltaic system produces energy based on solar irradiance, with the peak occurring during the central hours of the day. Domestic consumption, however, follows people's habits: breakfast, returning from work, and dinner. This mismatch between the production curve and the consumption curve is the reason why, without corrective measures, a significant share of the energy produced ends up being exported to the grid instead of being used directly in the home.

Statistical data from the GSE (page 4 of the official document) indicates that average self-consumption for a residential photovoltaic system in Italy without a battery stands at only 30% of the energy produced.

Why self-consumed energy is more valuable

The economic value of self-consumed energy is always higher than that of energy fed into the grid. The latter is remunerated at a feed-in tariff, whereas self-consumed energy avoids the need to purchase power from the grid at the full price, including charges and taxes. In practice, every kWh self-consumed is 'worth' much more than a kWh sold and repurchased at a later time. Increasing self-consumption is therefore not just a technical detail: it is the primary lever for truly reducing domestic energy costs.

Electric heating: increasing self-consumption naturally with CALDO SYSTEM

Heating is among the most significant domestic energy expenses in absolute terms. Unlike other loads (appliances, lighting), it has two characteristics that make it perfect for self-consumption:

  • The innovative logic of CALDO SYSTEM makes heating a 'shiftable' load: thanks to the thermal inertia of a building or a radiant system, the heat produced at one moment continues to be released for hours. This allows you to concentrate electricity consumption during the hours of peak photovoltaic production without sacrificing comfort in the evening.
  • It is an electrical load 100% compatible with photovoltaics. Unlike a gas boiler, which cannot 'consume' solar energy in any way, an electric heating system can directly absorb the energy produced by your panels without intermediate steps or conversion losses.

This combination — a high-demand, time-shiftable, natively electric load — makes CALDO SYSTEM's electric heating one of the best 'thermal storage' solutions for excess photovoltaic energy, often more cost-effective than an electrochemical battery for the same self-consumption goal.

The role of intelligent management: being electric is not enough

electric heating increasing building self-consumption CALDO SYSTEM

However, an important clarification is needed here: having electric heating is not, in itself, enough to maximise self-consumption. A traditional electric heating system, managed by a simple on/off thermostat, consumes power whenever heat is needed — regardless of whether the photovoltaic system is producing energy at that moment. To truly harness the sun's free energy, you need sophisticated control logic that decides when to switch on the heating based on photovoltaic production, not just ambient temperature; this is precisely one of the innovations brought to the market by CALDO SYSTEM.

How the CALDO SYSTEM approach works

CALDO SYSTEM addresses this challenge with e-Control, our proprietary home automation controller. It orchestrates the e-Membrane® heating system and communicates directly with your photovoltaic production data. At the heart of this management are our D.E.R. (Dynamic Energy Release) logics, a proprietary algorithm that dynamically regulates the system's energy release based on multiple real-time variables: available solar production, the building's thermal requirements, and structural inertia.

In practice, the system does not simply 'switch on and off' based on temperature. It anticipates and concentrates consumption during periods when the photovoltaic system is producing energy, charging the building's thermal inertia as if it were a true thermal energy store—without the costs, life-cycle limitations, or space requirements of an electrochemical battery. This type of dynamic management is what allows you to increase the self-consumption of produced photovoltaic energy up to 100%, with a direct and measurable impact on your energy bill. The result? Heating that is practically free during the shoulder seasons and an annual reduction in operating costs of approximately 50% thanks to photovoltaic support.

Brush Brush
Average national self-consumption
0%
Tools Tools
Self-consumption with a heat pump or other electric radiant system
0%
Rocket Rocket
Self-consumption with CALDO SYSTEM (managed via D.E.R. Logics)
0%
Why this approach differs from a standard smart thermostat

Many 'smart' systems simply allow for time-based scheduling or remote control, but they fail to truly integrate photovoltaic production data into their activation logic. The fundamental difference with a system like e-Control is that the decision of when to heat is not based solely on the time of day or current temperature. Instead, it relies on a dynamic calculation that accounts for the energy actually available at that moment, transforming your heating system from a simple consumer into an active tool for energy optimisation.

Tangible benefits for those who already have a photovoltaic system

For those who already have photovoltaic panels installed, pairing an electric heating system with CALDO SYSTEM’s dynamic self-consumption management provides:

  • Reduced volume of energy sold back to the grid at a price lower than its actual value for self-consumption;
  • Lower dependence on the electricity grid during evening hours, thanks to the heat stored within the building structure during sunny periods;
  • Faster return on your photovoltaic investment, as a greater share of produced energy is effectively utilised through self-consumption;
  • No need to oversize your photovoltaic system or install additional batteries simply to increase self-consumption, as the heating system itself acts as an intelligent thermal store.

We can therefore state that with CALDO SYSTEM, 'electric heating: increased self-consumption of photovoltaic energy is guaranteed!'

Conclusion

Owning a photovoltaic system is only half the journey toward a truly efficient home; the part that makes a real economic difference is how much of that energy you can use directly. When managed with dynamic logic capable of communicating with solar production—such as CALDO SYSTEM’s D.E.R. logic via e-Control—electric heating is not just compatible with photovoltaics; it becomes its natural complement, transforming the building's thermal inertia into a free energy store and driving self-consumption up to 100%.

In the next article in this series, we will explore in detail how the D.E.R. algorithm functions and which data points are used to optimise system decisions in real time.

CALDO SYSTEM S.r.l.

VAT No. 05141980234
Via Evangelista Torricelli 35e
37136, Verona
tel. 045 2078199
info@caldosystem.com
fully paid-up share capital € 1,500,000

NEED HELP?

If you require further information regarding our systems or a bespoke quote, please write to us and we will respond as soon as possible.

© Copyright – CALDO SYSTEM S.r.l. – Privacy & Cookie Policy

Italiano English (UK)
CALDO SYSTEM Assistant
Usually responds in a few seconds